- How To Change CPU Fan Speed Without Bios? [Easy Guide] - May 12, 2022
- M.2 Drive Not Showing Up In BIOS: 3 Super-Easy Fixes  - May 11, 2022
- Best AM1 CPU In 2022 [4 Top Picks Reviewed] - May 9, 2022
Computer screens are very fragile and you should handle them with extra care. Even a slight mistake can result in pressure spots and dead pixels. But the question is how to fix pressure spots on LCD screen.
In this article, we will go through a detailed process and learn how to fix pressure damage screen. It may sound a bit too technical at first but don’t worry as we’ve got you completely covered.
So without any further ado, let’s get started and learn to get pressure marks on tv screen or any other LCD.
- What Causes White Dots on Monitor Screen
- How to Fix Pressure Damage Screen?
- Step 1: Remove the Turn off your Screen and Remove Power
- Step 2: Place the Monitor/TV carefully on a flat stable surface
- Step 3: Remove the Back Panel
- Step 4: Take out the LCD Panel
- Step 5: Remove the Diffused Sheets
- Step 6: Clean the LCD Panel
- Step 7: Reassemble the Screen Carefully
- Step 8: Test Your Screen
- How to Fix Pressure marks on Phone Screen Today
- How to Fix Pressure Marks on Laptop Screen
- Final Words
What Causes White Dots on Monitor Screen
Before we learn how to fix the issue you need to understand the common reasons behind that. It is a general scientific approach to solving any kind of technical problem.
Without knowing the root cause of the issue you will just be finding needles in the sea.
According to our study, we noticed that there are several reasons due to which white dots on monitor screen may occur. These reasons are discussed below:
Pressure During the Delivery
It is possible that your computer screen or LCD may get some pressure during the package delivery. In most cases, you can return an LCD screen that gets damaged during the delivery process.
However, if you were delivering it from one place to another then unfortunately it is a total loss. You will have to fix it on your own because there is no one to cover you.
Pressing the LCD Screen Too Much
Another most common issue that results in dark or bright spots on LCD screens is pressing them hard. In most cases when you are giving a presentation or handling a touch-based interface you may apply too much pressure on the screen.
Although if you didn’t do it on purpose but still the screen will not be able to bear so much pressure. This will result in either dead pixels or pressure marks on the LCD screen. Pressure spot on phone screen is more common than any other device because 90% of the phones are based on touch screen interface.
How to Fix Pressure Spots on LCD Screen Now that you are aware of the common reasons behind pressure spots, it’s time to learn how they can be fixed.
Speaking of issues, check out our guide on pc keeps restarting before bios
How to Fix Pressure Damage Screen?
Here is a very basic method that will teach you how you can repair your pressure-damaged screen at home. You don’t need to have complex technical skills unless the situation is worse.
Please keep in mind that this method will only work for minor damage and pressure spots on your LCD screen. If your screen is damaged a lot then switching the whole panel is usually a much better option rather than applying DIY fixes.
Step 1: Remove the Turn off your Screen and Remove Power
The very first thing that you need to do is remove all the components from your computer. If it’s a desktop then disconnect the power as well as monitor cables and if it’s a laptop then remove the battery and detach them from your computer.
Also read – motherboard not detecting monitor
Step 2: Place the Monitor/TV carefully on a flat stable surface
The next step is to carefully place the monitor or TV on a flat surface. We don’t recommend you place it upside down because this may result in damage to the LCD panel.
Also, make sure that the surface is soft enough otherwise it may result in additional problems.
Step 3: Remove the Back Panel
Once you have removed all the power cables and connections to your LCD screen, the next thing is to remove the back panel. You will need a screwdriver for this job so make sure you have one at your disposal before following this step.
Make sure you unscrew all the screws from the back panel and double-check it. Sometimes there are screw holes covered behind the stickers. This is done to ensure that the monitor was never repaired before.
Speaking of back panels, check out our guide on do GPU fans blow in or out too.
Step 4: Take out the LCD Panel
LCD screens are extremely fragile and therefore, they are protected by glass screens. To properly fix the pressure marks on the screen, you will need to take it out.
As you have already opened the back panel of your monitor this step shouldn’t bother you much. However, it is the most important step and extreme care is needed otherwise you may lose your whole screen.
As mentioned earlier LCD screens are extremely fragile. To take out the LCD panel carefully, you will need to use a vacuum cup. It will help you detach the LCD panel from the case easily.
Also, make sure that you don’t do it alone unless you are 100% sure that you can handle it.
Step 5: Remove the Diffused Sheets
There are two or three diffused sheets present in the back of your LCD screen. These sheets help control the intensity of the colors.
To fix pressure marks on LCD screens, you will need to remove them carefully without any damage. The best way is to use a small flathead screwdriver and lift from one side. This will help you detach the diffused sheets without breaking them.
Again, you should be very careful while detaching the diffused sheets. Do not bend them otherwise you will have problems later. Also, make sure to place them somewhere on a clean and safe surface.
Step 6: Clean the LCD Panel
Once you have successfully removed the diffused sheets, it’s time to clean your screen. You will need to take a soft cloth for cleaning the display. Make sure the cloth is super clean and cotton-based to prevent any pressure during the cleaning process.
While cleaning the LCD screen with a cloth make sure to apply very gentle pressure. You should rub the area in a circular motion while doing this. The goal is to redistribute the liquid crystals equally in all directions and prevent the pressure marks from appearing.
Do not overdo it because if you do then it’ll cause problems in the long run. Also, don’t use any chemicals for cleaning your screen as they may damage them further.
Step 7: Reassemble the Screen Carefully
Once you are done cleaning your LCD screen, the next step is to reassemble it again. This process requires a lot of care. Take your time and do not rush things like dust.
Make sure that no pieces of dust are on the screen before you put it back together. It may result in dust particles ruining the screen.
Assemble everything very gently and make sure to attach all the diffused sheets equally. Otherwise, your monitor might have a slightly different color from one side to another which will ruin the whole purpose of the repair.
Step 8: Test Your Screen
The final step is to test your screen. Make sure to plug in the cables and check if it’s working well. Also, make sure that your monitor is turned on before testing it otherwise you might damage the LCD panel further which will cost a lot of money.
As these steps are very delicate, you should follow them carefully to keep your LCD monitor alive for a long time.
How to Fix Pressure marks on Phone Screen Today
Just like the computer screen, mobile screens are also extremely fragile and must be handled with care. If you have any pressure marks on your phone’s LCD the best bet is to replace the LCD screen.
Although you can try cleaning it just like the above-mentioned method. However, this method barely works for mobile phones and other small displays. You will need to either take it to the service center or buy a new screen for yourself.
In case you do buy a new screen, make sure to check the model number of your old LCD monitor and refer to it before buying. Also, if possible, ask the repair technician to fit the new display for free as a part of the warranty.
How to Fix Pressure Marks on Laptop Screen
A laptop screen is pretty much different as compared to a PC or a TV LCD screen. Therefore, fixing this issue is a bit more complex as compared to the above-mentioned methods.
You will have to get your laptop screen opened by a technician, clean it with isopropyl alcohol, detach its LCD and fit the new one in its place. You can also contact the service center for this job but they might charge you some money for it.
You shouldn’t open a Laptop LCD on your own as it is very delicate and will get damaged.
There are plenty of things you can do to prevent pressure marks on any type of LCD screen. You just need to be careful when working your way into the machine.
Also, try not to drop your device or keep it in a place where there is too much heat which may damage the screen further.
How do you fix a pressure screen?
Fixing a pressure screen may not always work but yes it is possible to fix it. All you need to do is to take out the screen and then clean it with a cloth or something.
The goal is to spread the liquid crystals back to their place which is displaced due to pressure. This may sound dumb but it works.
Do I get rid of pressure marks on my TV?
It depends on how severe these points are. If these are minor pressure dots then you can easily fix them without any issue at all. We’ve already discussed a complete method in the above article to fix pressure marks on LCD TV screens.
Having that said, if the marks are deep and beyond repair then all you can do is just replace the LCD or panel.
What happens when you push on an LCD screen?
when you push an LCD screen the pressure exerted on the screen forces the liquid crystals to disperse in different directions. Due to the motion of these liquid crystals, you may see some random colors on your screen. These are known as pressure marks on LCD screens.
Can you damage an LCD screen by touching it?
Yes, you can damage an LCD screen by touching it if you apply too much pressure to it. You need to be very careful when touching the screen because even a minor pressure may cause scratches on the surface of your LCD.
If you have made it this far, you will have learned How to Fix Pressure Spots on LCD Screen on your own. We know it may sound a bit complicated but it isn’t and all you need to do is to follow each step carefully as mentioned above.
Also, keep in mind this method will only work for minor damage and pressure spot. It will not work well for major damage. We hope you enjoyed reading our guide on fixing your LCD screen.
Please share it with your friends and family too. Sharing this article won’t cost you a dime but it can make someone’s day.